Absen
PL2.5 Lite
2.5 mm pitch 500 by 500 mm indoor LED panel with front and rear service access.
$1,150
1
Connectivity
What it connects to
Grouped the way the back panel is grouped. Port labels are the manufacturer's own, so they match what is silk-screened on the chassis.
Inputs and outputs
Panel data
| Port | Label | Connector | No. |
|---|---|---|---|
| Bidirectional | Data In | etherCON female | 1 |
| Bidirectional | Data Loop | etherCON female | 2 |
Power in
| Port | Label | Connector | No. |
|---|---|---|---|
| In | Power In | powerCON TRUE1 male | 1 |
Power loop
| Port | Label | Connector | No. |
|---|---|---|---|
| Out | Power Loop | powerCON TRUE1 female | 1 |
Passthrough
These outputs mirror an input rather than originating a signal, so a diagram follows the run straight through them.
- power_in 1 to power_loop 1
Specification
The facts
Only what is on record. A section nobody has filled in says so rather than showing a plausible number.
Power
Voltage
Power inlet
Power outputs
Physical
Width × height × depth
Weight
Mounting
Finish
Optical
Resolution
Pixel pitch
Brightness
Refresh
DocumentationNot recorded
Not recorded. This section has not been filled in for this product.
Visualization
Default zone
Placement
Notes
Source
Where the figures are uncertain
Data connector modelled as etherCON and power as powerCON TRUE1; the panel's actual connector types were not verified.
Systems
Designed into
This product is part of the following bundles. Each one ships with a complete signal flow.